[quote name='BrionTomberlin' date='11 May 2015 - 05:28 PM' timestamp='1431390512' post='13640'] Good looking knife TK. And congrats on the hamon, ni...

Thanks Lin and Steve - glad you like it!

[quote name='Steve Culver' date='07 September 2014 - 05:36 AM' timestamp='1410093368' post='11853'] TK, That's a beautiful knife! I'm ...

[quote name='BrionTomberlin' date='17 August 2014 - 05:34 PM' timestamp='1408322083' post='11669'] Yep TK, each run of steel may be slightly differe...

Karl and Brion: Today was experimenting day - I ground a blade down to .030" and took it up to about 1475 up to the clay using the forge (and my ...

[quote name='Karl B. Andersen' date='16 August 2014 - 05:54 AM' timestamp='1408193655' post='11656'] It's mostly a matter of time and temp, quench m...

[quote name='Matthew Parkinson' date='15 August 2014 - 04:34 PM' timestamp='1408145678' post='11654'] are you adding Ashi lines of thin clay off the...

[quote name='Gary Mulkey' date='15 August 2014 - 02:56 PM' timestamp='1408139795' post='11651'] T. K., How thick are you leaving the cutting ed...

[quote name='Gary Mulkey' date='15 August 2014 - 02:39 PM' timestamp='1408138747' post='11649'] T.K., I'm certainly no expert in a differential...

[quote name='Travis Fry' date='08 July 2014 - 05:45 PM' timestamp='1404866703' post='11236'] Only thing I can add is this: use your leather punch to...

Thanks Jared - goof feedback. I like your clamp idea very much.

Thanks Brion - I'll check it out