Thanks Bob for the tip on using the stiff felt. I can see how that would work. Scott

[quote name='justin carnecchia' date='28 May 2014 - 07:43 AM' timestamp='1401284618' post='10674'] Only thing to add is that with the last grit, fin...

[quote name='Robert Wright' date='26 May 2014 - 08:08 AM' timestamp='1401113289' post='10655'] Scott, I apply a light coat of Renaissance Wax...

[quote name='Teddy_Finesman' date='26 May 2014 - 05:00 AM' timestamp='1401102020' post='10651'] I am assuming that the buffing machine you have is r...

The knife is outstanding. Thanks for putting this thread together Brion!

First I want to thank all that have posted here. I have been away for a few days with the holiday weekend. If the masses say taking it to 1500 i...

Thank you George. Appreciate the tip as I was not thinking about additional belts for the KMG. For sharpening do you also use the cork belt to r...

Both of you do fantastic work. One of these days I hope that I meet Coop. Been a fan for a long time.

Thanks Justin. I can be a little retentive about things like this as I don't want to ruin anything mid-stream. This will make cleaning up after HT a l...

Julious your posts have been really helpful and I would hope that you keep publishing your adventure into forging. Sounds like a great class.

I have been following this thread and thought I would jump in. I have taken my knives up to 400 grit prior to HT. After HT I have been hand sanding in...

Although new to the ABS I have appreciated the work and dedication that the 2 of you have done. Getting a new website off the ground is not an easy ta...

Thanks for all your input. Looks like a 2HP is the way to go. Appreciate the advise. Scott