[quote name='Lin Rhea' date='16 April 2020 - 07:12 AM' timestamp='1587042731' post='26434'] Ty, that's a pretty knife you got underway. Side no...

good drills but also keep everything CLEAN, I have had oil get in a pin hole and stain the end grain, even on stabilized woods. don't heat the pin, I ...

Well now that is am image I'll never be able to unsee..

I have been running through some orders I had, and finishing up some knives I had on the bench for some time. I have some knives to make for the dama...

[quote name='Kevin R. Cashen' date='25 March 2020 - 08:13 AM' timestamp='1585145638' post='26349'] Those of us on the board do whatever we can to ke...

[quote name='Joshua States' date='24 March 2020 - 01:49 PM' timestamp='1585079340' post='26341'] Something else to consider is that the fuller is n...

Cindy is the BEST! we would all be lost with out her!! MP

not all of the quillion daggers have this that I have seen many are closer to what is common now. Most of those with that crazy cross section that I h...

More a visual issue. Just tiny amount of flux in the world line causing it to etch differently. Should be solid in My experience as long as the line w...

Looks like decarb along the weld line or possibly flux inclusion. If the former I wouldn't worry about it it isn't indicative of a bad weld. If the la...

blue painters tape works well just don't leave it on overnight. MP

Thanks.. I think.. Best of luck!

when I asked in 2016

I specifically asked about integrals, before submitting, and was told they were except-able as long as they met standard and were well executed. the t...