[quote name='camille_sennegon' date='17 October 2018 - 01:07 AM' timestamp='1539756423' post='23443'] So i just checked and 80crv2 can be water quen...

Parks #50 was developed as a replacement for water quenching, so using it on alloy steels is as close to water quenching them as you can get without a...

[quote name='camille_sennegon' date='16 October 2018 - 12:55 PM' timestamp='1539712519' post='23435'] I want to increase the quality of my blades by...

A gun case alone is enough. I like my firearms and want to keep them, I also want to arrive at my destination with as little hassle as possible witho...

I just wanted folks to be aware that at least one member of the board of directors is reading these suggestions and looking for good ideas that may be...

Flying below the radar in the judging room is a very sound tactic, if you are going to stand out, make it good. That being said a knife with no ident...

The reason for the caution against using Parks #50 can be summed up in one word- "chromium:. Parks #50 was designed to replace water in quench speed,...

I have heard that type of fit, which I like very much, referred to as a heirloom fit or heritage fit, this would be the first time I have heard the te...

Hmmm, that term is so subjective that it doesn't really have much meaning. I have seen the finest examples of craftsmanship and fit in museums and I ...

[quote name='Miguel Sanhueza Lang' date='18 June 2018 - 04:05 PM' timestamp='1529355942' post='22873'] Buenas tardes a todos. Bueno yo soy nuevo e...

[quote name='ben seward' date='09 July 2018 - 03:07 PM' timestamp='1531166872' post='22986'] And possibly without examination under a microscope we ...

[quote name='ben seward' date='07 July 2018 - 02:51 PM' timestamp='1530993103' post='22952'] Kevin, have you noticed steel in a highly spherodized s...