[quote name='Karl B. Andersen' date='26 December 2018 - 08:15 PM' timestamp='1545876907' post='23715'] To put it simply, the "test" is in two parts....

Sorry but I am going to be a bit long winded here. I am one of those guys who has made do with a cheap 4x36 belt sander (that I really use more like ...

[quote name='Karl B. Andersen' date='29 November 2015 - 11:10 PM' timestamp='1448856656' post='15354'] I have sold probably 1000+ pounds of it over ...

Ya i have been thinking on it and am thinking it would be cheaper to buy one. also i really do not like messing with electrically powered tools. been ...

[quote name='Jacob_Lutz' date='15 May 2018 - 11:47 AM' timestamp='1526402867' post='22676'] You might check out Reeder Grinders I don't have any con...

I thought i would chime in as i have been experimenting with making canister ingots myself over the last 2 months, and feel i should show proof so her...

Ok i feel like weighting in as i know a fair amount about plastics as one of my hobbies is building and modding robot plastic models. I would go with ...

Ok finally got it bolted down instead of wired in like it is in this picture, however i still have it wired to the bottom of the barrel. so do i need ...

Heres a shot of how i mounted Jaws. i am likely going to eventually upgrade the stand as i just wire bound it to the drum. looks dont really matter, w...

I was right it worked surprisingly well as the ingot fell out after i got the top off. however i cracked the thing. Attached files

[quote name='George Brackett' date='09 March 2018 - 09:01 PM' timestamp='1520647306' post='22211'] I made mine out of 3/8" plate for the base, and 1...

Hmm well frankly i have no idea were to go to get a I beam were I live, however I do have a architectural steel sculpture constructed from 1/4th inch ...