Somewhere on this site was an entire Quillon Dagger build by Steve Culver, and for some reason I can not find it now. Maybe someone else knows where...

[quote name='Dave McConnell' date='04 August 2018 - 06:34 AM' timestamp='1533386095' post='23138'] What does a museum quality fit mean? Can some on...

[quote name='jim sowers' date='02 August 2018 - 08:51 AM' timestamp='1533221477' post='23122'] I realize we all have to sketch a ton of knives, make...

Well, that was a lot of questions. I can offer this - I keep my ricasso height near an inch. Almost never less. On hunters I will stick right at a...

If you're going on a road trip somewhere, we almost always know WHERE we're going and HOW we're going to get there, whether it be a map or coordinates...

Good one, Brion. I'll jump in later.

[quote name='Dylan Harding' date='22 July 2018 - 02:17 AM' timestamp='1532247478' post='23061'] Has anyone tried masking a logo before etching damas...

That looks very nice!!

[quote name='Chad Hollar' date='18 July 2018 - 10:24 AM' timestamp='1531931076' post='23047'] Ahh..thank Karl. I did have some stick fairly we...

Chad - stainless sticks just fine in forge welds. When it doesn't do well is in a open environment with flux. Where it does forge weld fine is ...

You will be very hard pressed to beat the Esteem Grinder by Brett Mathews. It's based on the Bader BIII but is twice the grinder - and less $...

[quote name='Gary Mulkey' date='08 July 2018 - 06:33 PM' timestamp='1531096408' post='22962'] This topic leads me to an interesting question: How l...

Try a different technique - only etch for about 10 minutes at a time, repeatedly until you get the desired effect. Scrub off the residue between etche...

[quote name='Jason Volkert' date='07 July 2018 - 04:00 PM' timestamp='1531000801' post='22953'] [quote name='Karl B. Andersen' date='07 July 2018 - ...

[quote name='Jason Volkert' date='06 July 2018 - 03:22 PM' timestamp='1530912145' post='22944'] I am really interested in hearing about the process ...