I can't compare the two as I've only used the KMG but I've had no complaints with it except for the belt tracking adjustment. The wheel for adjusting...

Hi Dean, Just because the man wants a kitchen knife for his boat doesn't mean that it has to be salt water resistant. I would suggest using the...

[quote name='BrionTomberlin' date='08 June 2017 - 07:14 PM' timestamp='1496970871' post='20568'] Great WIP Gary! Thank you for putting this up. ...

Congratulations!

[quote name='Dan Cassidy' date='07 June 2017 - 09:21 PM' timestamp='1496892066' post='20546'] Gary Thank you for taking the time to post this W...

[quote name='Steve Culver' date='07 June 2017 - 08:33 PM' timestamp='1496889195' post='20542'] Excellent tutorial Gary!! And a beautiful kn...

Everyone is going to have favorites but for starters, a ceramic grit belt will last much longer than the aluminum oxide belts and is advisable for h...

Congratulations! Well done. Gary

Thank you, everyone.

I'm not sure that I couldn't do without this one but I re-purposed an antique drill into a twisting jig that's very handy:

It's not completely clear what you're asking. Ed covered the alignment well one way. It you are asking about the alignment the other then a lot of ...

Kevin, If you have a good reducing environment in the forge, using a flux isn't a necessity. I haven't used flux in several years. Adjust the g...