Erik Markman
Journeyman Bladesmith (5yr)
Trusted Member
Joined: Feb 15, 2021
Last seen: Jun 13, 2024
Topics: 8 / Replies: 43
Reply
Knife Shipping

[quote name='Robin Gagachian' date='28 April 2018 - 01:03 AM' timestamp='1524902618' post='22571'] Hi dear colleagues ! i'm starting this ...

7 years ago
Reply
Handle Material

Nicholas from PA is at Blade every year and they have great woods. Above all their stabilising is the best I ever had. K&G stabilising is very ...

7 years ago
Reply
Guard Finish

[quote name='Joshua States' date='25 January 2018 - 08:40 PM' timestamp='1516938056' post='21969'] This is the way I do all my frame handles, and an...

7 years ago
Reply
Best Of 2017, What's Yours?

Blade is 11.5" of W's damascus. Damascus guard and Maple burl handle.

7 years ago
Reply
Coffee Etching

Sand to 800. Medium deep etch with ferric. Buff till mirror. Degrease. Etch in very strong warm cheap instant coffee. Whole jar in...

7 years ago
Reply
Which Grinder?

I am using a Northridge since a month and could not be happier. It is so much smoother and precisely made then the KMG I had. Using them side by s...

8 years ago
Reply
Forging An Integral Chef Knife

Great process and hammering.

8 years ago
Reply
San Mai Blades - Topic For January 2017

What are your opinions on using 420 for the stainless? I have that.

8 years ago
Reply
What Is Your Best Work Of 2016

My JS set. I was pleased with how that turned out.

8 years ago
Reply
Integral Blade Grinding Tips And Techniques

Grind the tang to the shape you want. I heattreat after this and grind the false edge and do finish grinding after heattreat. ...

8 years ago
Reply
Integral Blade Grinding Tips And Techniques

Grind off all the excess steel from the back close to the topplate. File off the rest until the back is even with the topplate.

8 years ago
Reply
Integral Blade Grinding Tips And Techniques

Mark the back of the bolster and put it in the jig. Align the mark with the topplate and tighten the bolts evenly so that the spine of the blade is ...

8 years ago
Reply
Integral Blade Grinding Tips And Techniques

For the back of the bolster I use a jig to get it perfectly flat AND square to the blade. See the pics and you will see how I put it together. ...

8 years ago
Page 1 / 4