[quote name='Joshua States' date='24 December 2018 - 05:46 PM' timestamp='1545695214' post='23703'] Oh, my bad. I did not see any Roger Clark lis...

Different Roger Clark. The Roger Clark I am referring too went Journeyman the same year I initially did (1992) and if I recall correctly was from texa...

[quote name='Joshua States' date='23 December 2018 - 09:42 PM' timestamp='1545622947' post='23695'] Someone on another forum has found this knife at...

Pure Carnuba wax is my personal choice. Various reasons, never had an issue with fingerprints and spittle getting to the blade or handle materials. Wa...

This indeed is an interesting topic, there is so much 'white noise' on the internet one really has to be careful not to get sucked into all the rabbit...

Absolutely can be done, Pics below are a couple I did years ago using only my anvil, gas forge an 8 lb hammer with a 12-14 inch long handle and a stro...

For your power you will want as much amps as your service off the house will provide, 100 amp minimum and 200 is even better. From what you are saying...

Lin, that is simply outstanding craftsmanship, beautifully executed.

To get more life and better holes no matter what material your drills are made of, invest in a jar of Boelube. Developed by Boeing and used throughout...

Hammer acquired, thanks to all who contacted me on and off the board. Craig

[quote name='Robert_Burns' date='24 January 2017 - 10:43 PM' timestamp='1485319386' post='19374'] Craig, I'm in southern Minnesota and have a 50 lb ...

[quote name='David Sloan' date='23 January 2017 - 04:38 PM' timestamp='1485211086' post='19360'] Craig, If you have not found yourself a 50# LG...

I have a 125lb anvil I bought used 20 + years ago that needed a good dressing on the top. A little 'sway backed' (but not as bad as the OP's) with ham...