Looking For 50# Lit...
 
Notifications
Clear all

Looking For 50# Little Giant .. Edit: Found & Bought..

7 Posts
3 Users
0 Reactions
7,973 Views
Posts: 40
Member
Topic starter
 

I am looking around for a 50# hammer preferably with little work needed to start using, bad motor would not be an issue just a good decent hammer. I am in the north central Arkansas are and will drive to pick up if within reasonable distance ( 8-9 hours)

PM me through the board, post here or call

Thanks

Craig

757-739-9188

 
Posted : 12/01/2017 11:52 am
Posts: 51
Trusted Member Journeyman Bladesmith (5yr)
 

Craig,

If you have not found yourself a 50# LG yet. I do have two available one basket case and one freshly rebuilt. The fresh rebuild has more new parts than the value of the hammer. It's plug and play ready.

The basket case includes a bunch of new and rebuilt parts. It's a complete hammer. Just needs to be put together. (Fitting dies, babbit pouring, clutch lining, painting and such).

Dave from diller

If your still in the market and this sounds interesting let me know and give you call.

 
Posted : 23/01/2017 5:38 pm
Posts: 40
Member
Topic starter
 

|quoted:

Craig,

If you have not found yourself a 50# LG yet. I do have two available one basket case and one freshly rebuilt. The fresh rebuild has more new parts than the value of the hammer. It's plug and play ready.

The basket case includes a bunch of new and rebuilt parts. It's a complete hammer. Just needs to be put together. (Fitting dies, babbit pouring, clutch lining, painting and such).

Dave from diller

If your still in the market and this sounds interesting let me know and give you call.

David, I have been in contact on one but was unable to get over last weekend to look at it. Am going to try to go this weekend if it is still available. Would like to talk to you about yours in the event I miss out on the other one.

Thanks

Craig

 
Posted : 24/01/2017 6:23 pm
Posts: 5
Active Member Apprentice Bladesmith (5yr)
 

Craig, I'm in southern Minnesota and have a 50 lb little giant ready to go, in good running order but no cage. Give me a call at 412-477-4677 if you have questions.

-Robert Burns

 
Posted : 24/01/2017 11:43 pm
Posts: 40
Member
Topic starter
 

|quoted:

Craig, I'm in southern Minnesota and have a 50 lb little giant ready to go, in good running order but no cage. Give me a call at 412-477-4677 if you have questions.

-Robert Burns

Robert

I will give you a call first opportunity this afternoon. As I mentioned to Dave above I have a lead on one closer to me if it is still available.

Thanks for the contact.

Craig

 
Posted : 25/01/2017 10:18 am
Posts: 51
Trusted Member Journeyman Bladesmith (5yr)
 

Craig,

I can give you a call tomorrow 1/26 after 4 pm also.

I'm located in Southeast Nebraska fyi.

Thanks, and I hope one of us can get you fixed up.

If you have any questions concerning LG power hammers do not be afraid to ask. I've worked closely with Sid Suedmeier (the previous owner of LG) for the last 12 years.

If you get a chance this weekend and you have any question on the hammer snap some photo's post them up or email to me and I can work you through them.

Dave from diller

 
Posted : 25/01/2017 6:15 pm
Posts: 40
Member
Topic starter
 

Hammer acquired, thanks to all who contacted me on and off the board.

Craig

 
Posted : 25/01/2017 6:59 pm
Share: