Notifications
Clear all

First Hamon

2 Posts
2 Users
1 Reactions
406 Views
Branden Rapp
Posts: 10
Eminent Member Apprentice Bladesmith
Topic starter
 

This one is a hand forged hunting knife. The blade is forged from 1095 steel. I did a differential quench in warm canola oil to bring out a hamon line. Hand sanded to 400 grit before etching. The cutting edge of the blade is 5 1/4 inches long. The handle is made from Desert Ironwood and has been treated with Tru Oil for a high gloss shine. The handle is 5 inches in length. The overall length of the knife is 11 1/4 inches. The guard and pin are both mild steel. I used Perma Blu on the pin to dull the finish so it matches the blade and guard.

 

 

www.frontierforgeknives.com

 
Posted : 19/04/2021 10:59 am
ABS Administrator
Posts: 10
Active Member Admin
 

Congratulations Brandon, yours is the very first post on the new ABS forum, thank you for giving it a test run!  The blade is nice, the hamon has a classic double line from the separated phases during the quench.    

 
Posted : 19/04/2021 3:33 pm
Share: