Hi
On the bottom of this page is an inexpensive Round Knife for leather.....$6.00
If you want sharp corners just use a 2" inch round grinder wheel 80 grit and grind the steel away.
I sharpened it on a 2X72 220 grit belt grinder. Polished with a hard buffing wheel
I drilled a 1/4' hole and put the bolt in it to hold the blade in place.
Stabilized leather Knife Handle
Ernie
Ernie Grospitch
Huh, now that sounds handy. But what about holding an edge? After a single use it would've dulled right?
Hi,
For me it's use is primarily for a straight cut-off line
I just modified the Pizza cutter 7/9/14....seems to work pretty sharp 🙂
If you get a chance.... get one and grind away any part of it you don't need
How Long it will stay razor sharp...I don't know.
Ernie
Ernie Grospitch
Hi ,
Update:
When I sharpened it I used a low angle chisel type of grind.....rather than a "V" grind
Ernie
Ernie Grospitch