Notifications
Clear all

New Member Introductions 2011

114 Posts
33 Users
0 Reactions
5,077 Views
Posts: 9
Member
 

Nice to meet everyone - thanks for stopping by to welcome me aboard!

Best regards,

Greg

 
Posted : 27/02/2011 6:16 pm
Lin Rhea
Posts: 1563
Member
 

Welcome Greg.

Welcome to the forum Bob. I look forward to getting to know both of you guys. Lin

Lin Rhea, ABS Mastersmith

[email="[email protected]"]Email me[/email]

www.rheaknives.com

 
Posted : 27/02/2011 8:14 pm
Posts: 65
Trusted Member Journeyman Bladesmith (5yr)
 

Greetings! My name is Barry and I have been making knives for about 2 years, all stock removal, and have yet to finish one that I have been happy with! I don't get a lot of shop time and have only made about 2 dozen knives. I attented my first hammer-in this past weekend and had an absolute blast! The second thing I did monday morning when I got to work was join the ABS (the first was probably more important and that was getting a big cup of coffee). The knowledge that was shared at the hammer-in was a lot more than I could take in. I think I learned as many tips and tricks talking to the attendees as I did watching the demonstrators. Well I have an old beat up anvil, a gas forge, and a huge desire to learn how to forge blades. Thankfully I have a very understanding wife who supports my hobbies. Looking forward to talking with you on here and maybe one day heating and beating a blade with you.

Barry

 
Posted : 08/03/2011 7:58 am
Posts: 203
Estimable Member Journeyman Bladesmith
 

Welcome to the forum! You may already be aware that the ABS has classes in NC, but just in case you haven't seen that: http://www.americanbladesmith.com/index.php?section=pages&id=168

 
Posted : 08/03/2011 8:30 am
Dale Huckabee
Posts: 217
Member
 

Welcom Barry. Hammer-in's are a major source of information, but if you can swing an introductory class at one of the ABS schools, you will learn more in the two weeks than you can believe.

Dale

Dale Huckabee

Journeyman Smith

dalehuckabeeknives.weebly.com

 
Posted : 08/03/2011 8:34 am
Lin Rhea
Posts: 1563
Member
 

Welcome Barry! Your supportive wife will prove to be very important. We're glad to have you both on our side. Let us know if there is anything we can do. Lin

Lin Rhea, ABS Mastersmith

[email="[email protected]"]Email me[/email]

www.rheaknives.com

 
Posted : 08/03/2011 9:03 am
Posts: 65
Trusted Member Journeyman Bladesmith (5yr)
 

Thanks guys! I saw the ABS schedule while at the GSMBS and the 2 week class started yesterday. It is something to look into and would be well worth the cost and effort.

Lin, one of the man reasons I went to the hammer-in was after watching a video of you hammering out a blade that you posted on tradgang. I have watched it several times and have seen something new each time. It really looked like fun. I got to forge a blade in the green coal area with James Gibson helping me saturday and now I can't wait to get some shop time to try to do another one.

 
Posted : 08/03/2011 9:32 am
Steve Culver
Posts: 827
Prominent Member Master Bladesmith/ABS Instructor
 

Welcome Barry!! Hope you get a lot of good information here on the forum!

 
Posted : 08/03/2011 8:43 pm
Admin_DJC305
Posts: 1999
Member
 

Barry

Welcome to the American Bladesmith Society and the ABS Forum.

Dan Cassidy
Journeyman Smith
Send an email to Dan

 
Posted : 08/03/2011 8:56 pm
BrionTomberlin
Posts: 1675
Member
 

Welcome Barry, glad to have you along. As Lin said, a supportive wife is a great thing. I look forward to meeting you in the future. Any questions just feel free to contact us.Enjoy yourself and have fun.

Brion

Brion Tomberlin

Anvil Top Custom Knives

ABS Mastersmith

 
Posted : 08/03/2011 11:11 pm
Posts: 0
New Member Guest
 

Hello my name is Chad Harding, I live in solsberry IN and have been making knives for about seven years,I am a part time maker with hopes of becoming full time in a few years. I am looking for other ABS members in my area, I know of a few that are listed but am sure there are some closer to the Bloomington IN area. I am also in the June issue of BLADE.

 
Posted : 31/03/2011 1:47 pm
Admin_DJC305
Posts: 1999
Member
 

Chad

Welcome to the ABS Forum! Please post your questions on the Forum and knife photos in the Gallery.

Dan Cassidy
Journeyman Smith
Send an email to Dan

 
Posted : 31/03/2011 4:32 pm
Posts: 5
Member
 

Hi Greg,

Welcome!

Any chance you're from Coventry,CT originally?

Bill

 
Posted : 31/03/2011 9:06 pm
Posts: 0
New Member Guest
 

Hey Chad! -- Congrats on Blade! I haven't got the June one yet. Looking forward to seeing your work. Good luck with rallying the troops in Indiana. WELCOME! -- Phil

 
Posted : 01/04/2011 2:07 am
Posts: 203
Estimable Member Journeyman Bladesmith
 

Welcome to the forum and congratulations on making the June issue of Blade.

 
Posted : 01/04/2011 7:07 am
Page 2 / 8
Share: